ACDELCO 1722404 Specifications |
---|
Bleeder Thread Diameter | 10x1 5 | Brake Caliper Manufacturer | Akebono | Caliper Color | Gray | Caliper Slides Included | Yes | Caliper Type | Floating | Casting Material | Cast Iron | Height (IN) | 5.2 | Inlet Fitting Type | Straight | Inlet Thread Diameter (IN) | 0.39 | Inlet Thread Diameter (MM) | 10 | Length (IN) | 14.1 | Mount Hole Diameter (IN) | 406.4in | Mount Hole Diameter (MM) | 16mm | Mounting Bracket Included | No | Mounting Hardware Included | No | Pad Wear Sensor Included | No | Pads Included | No | Piston 1 Diameter (IN) | 2.25 | Piston 1 Diameter (MM) | 57.15 | Piston 2 Diameter (IN) | 2.25 | Piston 2 Diameter (MM) | 57.15 | Piston Material | Steel | Weight (lb) | 15.2 | Width (IN) | 8.2 |
|
|
Get the GM quality you know and trust with ACDelco GM Original Equipment Calipers. Features & Benefits:
- Pressure tested to ensure safe and confident braking
- Ethylene Propylene (EPDM) rubber components provide superior resistance to heat, corrosion, and leakage
- Manufactured with GM Original Equipment specification for fit, form, and function
Installation Tips - Always inspect brake pads and rotors when replacing your calipers. Faulty calipers can lead to uneven pad and rotor wear
- Inspect or change brake hoses when replacing the caliper. Worn or damaged hoses should be replaced to prevent brake fluid contamination or loss
- Use a Brake Fluid Tester to test your brake fluid. If your brake fluid has moisture in it, flush the system before installing the new caliper
- Apply Blue Threadlocker to caliper bracket mounting bolts to lock the bolts in place and prevent loosening or backing out
- After installing the new caliper, bleed your brakes to ensure no air is trapped in the brake fluid. RockAuto offers a selection of Brake Bleeding Tools to help with this process
- After the brakes have been bled, top off the master cylinder reservoir with the proper Brake Fluid
|
OEM / Interchange Numbers: 25846387 |
|