FVP 14134034
|
|
$25.79
Price
|
$50.00
Core
|
+ Sold in packs of 1x1
Pack
|
$75.79
Total
|
|
|
|
FVP 14134034 Specifications |
---|
Abutment Clips Included | Yes | Air Gap | 100.5mm | Bleeder Screw Included | Yes | Bleeder Screw Thread Diameter | 8.000 MM | Bleeder Screw Thread Size | M8-1.25 | Bracket # | 147.34034 | Caliper Casting Material | Cast Iron | Caliper Color | Gray | Caliper Manufacturer | ATE | Caliper Type | Floating | Casting Number | 54/22; 639; 697; 803 | Inlet Fitting Type | Bubble | Inlet Thread Diameter | 10.000 MM | Inlet Thread Size | M10-1.00 | Mount Thread Size mm | M12-1.50 | Mounting Bracket Included | Yes | Mounting Hardware Included | No | Pad Wear Sensor Included | No | Pads Included | No | Piston Diameter | 2.126 in | Piston Diameter | 54.000 MM | Piston Material | Steel | Piston Quantity | 1 | Published Bore Size | 54 | Rust Preventative Coating | Yes |
|
|
FVP Friction Ready calipers are remanufactured to meet ensure predictable and reliable performance while providing long service life.
Features:
- 100% pressure tested and inspected to guarantee proper operation and fitment
- All guide bolts, pins and seals are replaced, guaranteeing the caliper will function correctly
- Hardware and brackets included (where applicable) to facilitate an easy installation
- Brake pads not included
Installation Tips - Always inspect brake pads and rotors when replacing your calipers. Faulty calipers can lead to uneven pad and rotor wear
- Inspect or change brake hoses when replacing the caliper. Worn or damaged hoses should be replaced to prevent brake fluid contamination or loss
- Use a Brake Fluid Tester to test your brake fluid. If your brake fluid has moisture in it, flush the system before installing the new caliper
- Apply Blue Threadlocker to caliper bracket mounting bolts to lock the bolts in place and prevent loosening or backing out
- After installing the new caliper, bleed your brakes to ensure no air is trapped in the brake fluid. RockAuto offers a selection of Brake Bleeding Tools to help with this process
- After the brakes have been bled, top off the master cylinder reservoir with the proper Brake Fluid
|
Warranty Information:Limited Lifetime |
|