SONNAX
More Information for SONNAX 7773310KA
{Alternate Inventory Numbers: 77733-10KA, S74554DAHPK}
Continue Shopping
 
SONNAX 7773310KA  
$1,082.79
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$1,082.79
Total
(Only 1 Remaining)
SONNAX 7773310KAclose
<
>
Part image
Smart-Tech Input Housing Kit with Heavy Duty Input Shaft
Limitations of the GM 4L60 series OE input housing are the root cause of 3-4 burnup in performance applications. The weak OE backing plate flexes during clutch apply, allowing heat to build up unevenly within the clutch pack’s limited space. Stop the flex and you stop 3-4 clutch failure. Sonnax Smart-Tech input housing kit 7773310KA makes room for a taller clutch pack anchored in place by a stronger backing plate — the most reliable way to increase clutch capacity and protect against destructive heat.

To avoid the problems found with older, OE housing designs, Sonnax starts with the latest production, new housings from GM. These improved housings have splines for the input shaft that are cut at minimum spec for reliable shaft retention and sealing. The housings also benefit from added material for a thicker, more consistent cross-section that protects against breakage.

Smart-Tech input housing kit with heavy duty input shaft 7773310KA fits 298mm torque converter units. The high-strength shaft features many unique refinements available only from Sonnax, including a unique design that protects against failure from stress cracks.

Features & Benefits:
  • Physically larger clutch pack area for increased 3-4 clutch capacity without sacrificing clutch durability. Use your choice of:
    1. Eight .067" frictions with seven .095" steels
    2. Nine .062" frictions with eight .077" steels
  • Anchored backing plate keeps clutches parallel to stop the flexing and distortion that leads to heat build-up
  • 100% New housing optimizes input shaft fitment and is further upgraded for significantly more resistant to fatigue failure
  • Steel reinforcement sleeve prevents breakage in the spline area
  • Custom backing plate replaces OE retaining ring to eliminate risk of blowout
Kit Contents:
  • Smart-Tech® Input Housing with 298mm Input Shaft Assembly
  • Bolt-on Anchor Plate
  • 3-4 Clutch Apply Plate
  • 3-4 Clutch Return Springs (10)
  • Input Drum Reinforcement Sleeve installed
  • Overrun Piston
  • Overrun Piston Inner Seal
  • Overrun Piston Outer Seal
  • PTFE Impregnated Rear Stator Support Bushing
  • Socket Head Cap Screws (15)

Videos

Eliminate 3-4 Clutch Failure with the Smart-Tech® Input Housing


Your Guide to a Sonnax 4L60/E High Horsepower Level 3 Transmission Build
Additional Resources

Installation Instructions
OEM / Interchange Numbers: 08663580, 17803689

SONNAX Warranty Information:
6 months