TPI
More Information for TPI MAF1184
Continue Shopping
 
TPI MAF1184  
$54.79
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$54.79
Total
TPI MAF1184close
<
>
Part image
Complete Assembly

TPI supplies a complete range of aftermarket OE quality mass air flow sensors. Each mass air flow sensor is checked to ensure it meets or exceeds OEM specifications and is tested against heat, cold and vibration. Each sensor is carefully packaged with a silica bag to avoid oxidization and moisture.

Features & Benefits:
  • Ceramic OE Style / Fiberglass Epoxy circuit boards reduce RFI and other issues
  • Dual Wire Technology ensures twice the durability
  • Platinum wires used on each sensor
  • State of the art Sonic Nozzle Testing on every part
  • Silica Sandbag included with every item to reduce oxidization
  • Installation Tool included where necessary to ensure product installed properly the first time
Check for Vacuum Leaks First!

Vacuum leaks present symptoms similar to a faulty MAF Sensor. When replacing the MAF, always check for vacuum leaks, too. Common sources include:

  • Cracked or loose Vacuum Hoses / Connectors - an audio Stethoscope can help detect air induced sounds from vacuum leaks.
  • Leaking Intake Manifold Gasket (found in the "Engine" category) - Vacuum Gauge readings below 17-22 in-Hg (normal manifold vacuum at sea level) at idle may indicate an intake manifold gasket leak.
    • Note: As elevation increases, readings decrease. Subtract 1 in-Hg from normal manifold vacuum reference for every 1,000 feet increase in elevation above 2,000 feet.
  • Stuck open PCV Valve - remove the PCV Valve and gently shake it; if it does not rattle, the valve is clogged or dirty and should be replaced.
  • Cracked Intake Boot (found in the "Engine" category)
Videos

Cleaning Your MAF Sensor

Additional Resources

RockAuto Newsletter: Maintaining the Optimal Air/Fuel Mixture

TPI Warranty Information:
12 Months