BOSCH
More Information for BOSCH 20010331
Continue Shopping
 
BOSCH 20010331  
$30.79
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$30.79
Total
Choose
BOSCH 20010331close
<
>
Part image
Sold Individually
BOSCH 20010331 Specifications
Bearings IncludedNo
Brake Surface FinishSolid
Center Bore Diameter72 mm
ConstructionVented
Conventional Or Drum-In-Hat Type RotorConventional
Directional or Non-Directional Brake SurfaceDirectional
Disc FinishGeomet
Discard Thickness24.5 mm
Mounting Bolt Hole Circle Diameter114.3 mm
Mounting Bolt Hole Quantity5
Nominal Thickness26 mm
Outside Diameter305 mm
Overall Height66 mm
Product Height2.598425 in
Rotor Without Hub AssemblyYes
Rust Resistant CoatingYes
Thickness (Disc Brake Rotor)26 mm
QuietCast
Features & Benefits:
  • 100% Precision balanced to ensure smooth operation and minimize pedal pulsation
  • Heat flowed castings promote consistent wear for quiet operation and long life of the product
  • Aluminum-Zinc coating protection prevents rust and corrosion, extending life and provides better heat dissipation
  • OEM-Style vane configuration pulls heat from the inner part of the wheel, away from the caliper
  • ABS (Anti-lock Braking System) sensor rings allow for trouble-free operation of ABS/TCS on ABS/TCS equipped vehicles
Installation Tips
  • Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
  • Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
  • After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
  • Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
  • Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
  • Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
  • After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function


Additional Resources

Bosch QuietCast Brake Rotors Features
OEM / Interchange Numbers: 1F6033251B

Closeout Inventory Warranty Information:
Wholesaler Closeout items have a 30 day warranty (but still are covered by our Return Policy).

Regular Inventory Warranty Information:
12 Months
Warranty Details