|
FVP BSK90160
|
|
$7.77
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$7.77
Total
|
|
|
|
|
|
| FVP BSK90160 Specifications |
|---|
| Assembled Length | 1.6 In. | | Bracket Included | No | | Grease Fitting Included | No | | Inside Diameter | 34 mm | | Material | Rubber | | Outside Diameter | 1.95 mm | | Package Contents | 2 Bushings | | Width | 1.76 MM |
|
|
Features:- Rigorously tested - thorough quality control measures ensure longevity
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Direct replacement - precision-engineered to match the design and dimensions of original components
Sway Bar Bushing diameter can be within 1mm of your Sway Bar diameter. The clamping force of the bracket will account for the variance.
 How To Determine Stabilizer (Sway) Bar Diameter To determine Stabilizer (Sway) Bar diameter, measure the bar next to the bushing (toward the center of the vehicle), utilizing one of the methods below.
- Use a digital caliper or micrometer for a precise reading
- Use an open end wrench that fits snug around the bar, or tighten an adjustable wrench around the bar, and then measure the span opening
- Wrap a piece of non-stretchable tape (like masking tape) around the bar to get the circumference. Circumference divided by Pi (3.14) = Diameter. In the example below, the tape measured 3 5/8". 3 5/8 = 29/8 = 3.63 inches. Diameter = 3.63/3.14 = 1.15 inches.
Attention California Customers - WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
|
| OEM / Interchange Numbers: 10233859, 10284183, 14073012, 14094388 |
Warranty Information:Limited Lifetime |
|
