FRAM HM3682
|
|
$6.31
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$6.31
Total
|
|
|
|
FRAM HM3682 Specifications |
---|
Anti-Drain Back Valve | Yes | Burst Pressure | 310.000 PS | Bypass Relief Valve | No | Filter Media Material | Cellulose/Synthetic Blend | Filter Type | Spin-On Canister | Gasket Inside Diameter | 2.550 in | Gasket Material | Base | Gasket Outside Diameter | 2.715 in | Gasket Thickness | 0.135 in | Gasket Type | Base | Height | 4.111 IN | Housing Color | Orange | Inside Thread Diameter | 3/4-16 | Marine Approved | No | Non Slip Grip | Yes | Outside Diameter | 2.984 in | Thread Size | Standard | Torque Nut | No |
|
|
FRAM® High Mileage® For vehicles with over 75,000 Miles
- Industry exclusive, patented time-released gel additive conditions oil through the entire change cycle
- Gel additives balance oil PH and maintain viscosity
- Ideal for older engines that are more susceptible to oil break-down
- Uses cellulose and synthetic glass blended media to provide 3X MORE engine protection than the average of leading economy oil filters
- 95% Dirt Trapping Efficiency
How It Works - Dirty oil enters the filter
- The oil passes through the media where it's filtered with 96% single pass efficiency
- The TRT™ additive gel is time released into the filtered oil
- The additive dissolves slowly into the oil
- The treated oil flows back into the engine to protect against corrosive wear, deposits and viscosity build-up
![](/Images/MoreInfo/star.png) Which Oil Filter Is Right For You?
| Driving Style |
Filter Type |
Oil Change Intervals |
Normal City / Highway |
Heavy Traffic |
Dirty / Dusty Conditions |
Extreme Weather |
Towing |
Economy
|
3,000 - 5,000 Miles |
★ |
|
|
|
|
Standard Replacement
|
OEM Recommended |
★ |
★ |
★ |
|
|
High Performance / Heavy Duty
|
OEM Recommended |
★ |
★ |
★ |
★ |
★ |
![](/Images/MoreInfo/install.png) Oil Change Toolbox
![](/Images/MoreInfo/install.png) Installation Instructions - Check owner's manual for correct oil specification, viscosity, and amount. Purchase oil by year, make, and model, or under the Tools & Universal Parts tab on RockAuto.com
- Wear proper protective gear (safety glasses, gloves, long sleeve shirt) to protect skin and eyes from hot oil.
- Place a Drain Pan under the crankcase and carefully open drain plug to drain oil. When oil is fully drained, reinstall drain plug on the oil pan.
- Position the drain pan under the oil filter. Unscrew oil filter (using a Filter Wrench, if necessary).
- Clean mounting base, making sure the O-ring from the old filter is not stuck to the filter mount.
- Apply film of clean oil to filter gasket.
- Screw new filter on until gasket reaches base contact, then tighten filter to manufacturer specifications.
- Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
- Shut off engine and recheck oil level after 5 minutes. Top off as necessary.
It is illegal to dispose of used oil or oil filters in a sanitary landfill or public waterway. Many towns have free hazardous waste drop-off sites, which a quick internet search will help you find.
|
OEM / Interchange Numbers: HM3682DP |
FRAM Warranty Information:Filters - Vehicle Manufacturer's Recommended Service Intervals Hard Parts - 12 MonthsWarranty Details |
|