Reprogramming Kit; Stick Shift or Gear Command Option; For 700R4, 4L60 Transmissions
This Reprogramming Kit fits 1982 to 1993 General Motors vehicles equipped with the 700R4/4L60 automatic transmission. This kit is designed for all-out shift performance.
There are two installation options with this kit. The first option gives you fully automatic shifts in “D” as well as the ability to hold any gear to any speed with the shift lever. It also allows for downshifts to any gear at any speed by moving shift lever. High throttle 3-4 shift is controlled by shift lever. The second option gives you manual shifts only. The transmission will start off in whatever gear the shift lever is in and will shift to any gear at any speed by moving the shift lever. This kit also includes our #7-CS 3-4 clutch piston return spring kit for the input drum which reduces centrifugal 3-4 clutch apply and failure in 1st gear at 5500 RPM or higher.
Lastly the kit can be installed with the transmission in vehicle or on the bench. However, transmission removal is necessary to install the clutch piston return spring kit.
Corrects/Prevents/Reduces:
Burnt 2-4 band and 3-4 clutch plates
Burnt forward and low/reverse clutch plates
Provides fully automatic shifts
Provides full manual control option for upshifting and downshifting 1st through 4th gear
Includes:
Pressure regulator valve spring and snap ring
(3) Valve body plugs
(2) Drill bits
(3) TV valve springs, TV valve, spacer and aluminum washer
(3) 2nd accumulator valve springs
(2) Line bias valve springs
(2) USA-made hardened steel 3-2 control valves, springs and end plugs
3-4 Shift valve spring
2-3 Shift valve spring
(5) Separator plate plugs
(2) Case tapered orifice plugs
Case tapered plug
(6) Washers for band adjustment
Servo spring
Governor spring
Valve body gaskets
3-4 clutch return springs and orifice capsule
Forward clutch return springs and installation washer
Kit de changement de vitesse vs kit de reprogrammation de TransGo
Shift Kit® -- Conçu pour la durabilité
Les kits de réparation pour boîtier de soupapes Shift Kit® de TransGo corrigent, empêchent et réduisent plusieurs problèmes de boîte de vitesses comme les irrégularités de changement de vitesse et les problèmes de fiabilité . Ces kits sont conçus pour une utilisation quotidienne normale et un remorquage léger.
Kit de reprogrammation -- conçu pour les performances
Les kits de performance pour boîtier de soupapes Reprogramming Kit™ de TransGo sont fabriqués pour les applications à service intensif et/ou de performance, et comprend des caractéristiques supplémentaires comme :
Gear Command™: Permet un contrôle total de la rétrogradage et maintient n'importe quel rapport à n'importe quel régime. Retient les passage en rapport supérieur dans la position de marche avant. Certaines unités permettent de passer manuellement en rapport supérieur à la demande du conducteur.
Commande de changement de vitesse manuel: Cette caractéristique convertit le boîtier de soupapes complètement en fonctionnement manuel / à levier de vitesses – pas de changements de rapport automatiques. La plupart des kits de commande de changement de vitesse manuel vous permettent aussi de convertir facilement à nouveau en automatique.
Sans tunning: Technologie de calibrage interne à brevet en instance « sans tuning » permet l'installation sans avoir besoin d'un logiciel de calibrage de la boîte de vitesses ou d'un programmateur supplémentaires.
Assistance Technique de TransGo
Si vous avez des difficultés en choisissant la bonne pièce TransGo, ou vous avez des questions avant, pendant ou après l'installation de cette pièce, les techniciens certifiés par ASE sont disponibles pour aider.
📞 Téléphone : 626-443-7451 (7h00 à 16h00 HNP Lundi à Vendredi) 📧 E-mail : support@transgo.com