ENGINETECH ESL180
|
|
$10.74
Precio
|
$0.00
Depósito
|
+ Vendido en Paquetes de 1x1
Empacar
|
$10.74
Total
|
|
|
|
Especificaciones de ENGINETECH ESL180 |
---|
Taladro (Milímetro) | 101.600 mm | Taladro de Cilindro Diámetro | 4.0000 pulg. | Acabado Diámetro Externo | 4.1900 pulg. | Grado Tipo | Regular | Longitud | 6.500 pulg. | Longitud (Milímetro) | 165.100 mm | Grosor | 3/32 pulg. | pared Grosor (pulg.) | 0.09375 pulg. | pared Grosor (Milímetro) | 2.381 mm |
|
|
- The complete line of Enginetech Cylinder Repair Sleeves is available for all popular sizes and assorted lengths.
- Every Enginetech cylinder sleeve is carefully cast using the centrifugal casting method. Centrifugal casting assures that every sleeve is produced with a homogenous material resulting in a high quality product every time.
- Enginetech repair sleeves are designed and produced with a semi-finished ID that allows the machinist to remove at least 0.025" of material during the boring and honing process.
- Each repair sleeve is chamfered at the bottom OD edge for ease of installation into the engine block.
- Enginetech also offers popular High Performance (HP) cylinder sleeves. Our HP sleeves are centrifugally cast from a premium formula that yields higher hardness (293 BHN) and higher tensile strength (45000 PSI).
- Each Enginetech cylinder sleeve is individually packaged in it's own protective box and is wrapped in rust preventative paper for improved shelf life.
- For cylinder sleeves that meet a high standard of quality and value, along with excellent service and technical support, you need Enginetech.
|
ENGINETECH Información de Garantía:Repuestos de Reemplazo Estándar: 12 meses / 12,000 Millas; Repuestos de Alto Rendimiento: No Tiene GarantíaDetalles de Garantía |
|