FRAM HM30
|
|
$5.38
Precio
|
$0.00
Depósito
|
+ Vendido en Paquetes de 1x1
Empacar
|
$5.38
Total
|
|
|
|
Especificaciones de FRAM HM30 |
---|
Válvula Antidrenaje | No | Tipo de Instalación | Montaje Roscado | Presión de Estallido | 230.000 PS | Circunvalación Válvula de Alivio | No | Medios de Filtro Material | Celulosa/Mezcla Sintética | Tipo de filtro | Montaje Roscado Bote | Altura | 4.063 pulg. | Carcasa Color | Naranja | Entrada Tipo | Roscado | Interior Rosca Diámetro | 12/16-16 | Marino aprobado | No | Clasificación de Micrones | 8.000 micrones | No Deslizamiento Agarre | Sí | Diámetro Externo | 3.781 pulg. | Tamaño de Rosca | Estándar | Tuerca de Par de Torsión | No |
|
|
Alto Kilometraje; Montaje Roscado |
FRAM® High Mileage® For vehicles with over 75,000 Miles
- Industry exclusive, patented time-released gel additive conditions oil through the entire change cycle
- Gel additives balance oil PH and maintain viscosity
- Ideal for older engines that are more susceptible to oil break-down
- Uses cellulose and synthetic glass blended media to provide 3X MORE engine protection than the average of leading economy oil filters
- 95% Dirt Trapping Efficiency
How It Works - Dirty oil enters the filter
- The oil passes through the media where it's filtered with 96% single pass efficiency
- The TRT™ additive gel is time released into the filtered oil
- The additive dissolves slowly into the oil
- The treated oil flows back into the engine to protect against corrosive wear, deposits and viscosity build-up
![](/Images/MoreInfo/star.png) ¿Qué Filtro De Aceite Es El Adecuado Para Usted?
| Estilo de Conducción |
Tipo de filtro |
Los intervalos de cambio de aceite |
Normal Ciudad / Autopista |
Tráfico Pesado |
Condiciones Sucias / Polvorientas |
Clima Extremo |
Remolque |
Económico
|
3,000 - 5,000 Millas |
★ |
|
|
|
|
Reemplazo Estándar
|
Recomendado por el Fabricante de Equipos Originales |
★ |
★ |
★ |
|
|
Alto Rendimiento / Uso Rudo
|
Recomendado por el Fabricante de Equipos Originales |
★ |
★ |
★ |
★ |
★ |
![](/Images/MoreInfo/install.png) Cambio de Aceite Caja de heramienta
![](/Images/MoreInfo/install.png) Instrucciones de Instalación - Check owner's manual for correct oil specification, viscosity, and amount. Purchase oil by year, make, and model, or under the Tools & Universal Parts tab on RockAuto.com
- Wear proper protective gear (safety glasses, gloves, long sleeve shirt) to protect skin and eyes from hot oil.
- Place a Drain Pan under the crankcase and carefully open drain plug to drain oil. When oil is fully drained, reinstall drain plug on the oil pan.
- Position the drain pan under the oil filter. Unscrew oil filter (using a Filter Wrench, if necessary).
- Clean mounting base, making sure the O-ring from the old filter is not stuck to the filter mount.
- Apply film of clean oil to filter gasket.
- Screw new filter on until gasket reaches base contact, then tighten filter to manufacturer specifications.
- Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
- Shut off engine and recheck oil level after 5 minutes. Top off as necessary.
Es ilegal deshacerse de aceite usado o de filtros de aceite en un vertedero sanitario o en un cauce público. Muchas ciudades tienen sitios gratuitos para depositar desechos peligrosos, que una búsqueda rápida por internet le ayudará a encontrar.
|
Fabricante Original de Equipo / Números de Intercambio: HM30DP |
FRAM Información de Garantía:Filtros - Intervalos de servicio recomendados por el fabricante de vehículo Repuestos Duros - 12 mesesDetalles de Garantía |
|