MEVOTECH
More Information for MEVOTECH K6161
Continue Shopping
 
MEVOTECH K6161close
Part image
Depending on the type of bushing, different materials such as rubber and polyurethane can be used in the design of the product. Many of the Mevotech bushings use polyurethane components in their design, providing enhanced corrosion resistance and an overall smoother ride for the driver.
Sway Bar Bushing diameter can be within 1mm of your Sway Bar diameter. The clamping force of the bracket will account for the variance.
How To Determine Stabilizer (Sway) Bar Diameter

To determine Stabilizer (Sway) Bar diameter, measure the bar next to the bushing (toward the center of the vehicle), utilizing one of the methods below.

  1. Use a digital caliper or micrometer for a precise reading
  2. Use an open end wrench that fits snug around the bar, or tighten an adjustable wrench around the bar, and then measure the span opening
  3. Wrap a piece of non-stretchable tape (like masking tape) around the bar to get the circumference. Circumference divided by Pi (3.14) = Diameter. In the example below, the tape measured 3 5/8". 3 5/8 = 29/8 = 3.63 inches. Diameter = 3.63/3.14 = 1.15 inches.


Warranty Information:
Limited Lifetime
Warranty Details