GATES 85387
|
|
$276.79
Precio
|
$0.00
Depósito
|
+ Vendido en Paquetes de 1x1
Empacar
|
$276.79
Total
|
|
|
|
Especificaciones de GATES 85387 |
---|
Material de Barrera | Nylon Forro | Curva Radio (pulg.) | 3 | Presión de Estallido (PSI) | 1400 | Recomendación de Acoplamiento | PolarSeal II Acoplamientos | Cubierta Color | Negro | Cubierta Material | Synthetic Elastomeric Rubber | Tipo de Cubierta | calor, Humedad y ozono resistente | Dash Size | 12 | Manguera Material | Elastomeric Rubber | Manguera Presión Descripción | Medio Presión | Diámetro interno (pulg.) | .625 | Máximo Presión Operativa (PSI) | 350 | Diámetro Externo (pulg.) | .96 | Producto Tipo | PolarSeal II Manguera | Refuerzo Material | Tela Trenza | SAE Estándar | J3062 | Clasificación de Temperatura | -40 Grados F a +275 Grados F (-40 Grados C a +135 Grados C) | Tubo Descripción | Black, Synthetic Elastomeric Rubber | Tipo | Flota Aplicación y Mantenimiento Manguera |
|
|
PolarSeal II Hose is recommended for most refrigerant blends and compressor lubricants in automotive and heavy-duty truck air conditioning systems where significant reduction in permeation and moisture ingression is desired. Low-permeation hose construction is used by more OEMs around the globe than any other refrigerant hose construction. Gates PolarSeal II derives its performance from a proprietary polyamide barrier and exceptional compounding, making it compatible with R134a, R12, and R1234yf refrigerant.Features:- Exceptional resistance to refrigerant permeation
- Black Chloroprene rubber tube inside a nylon barrier, reinforced with one layer of braided polyester and a Chlorobutyl cover
- Cover is heat, moisture and ozone resistant
- Meets or exceeds SAE J3062 Type C, Class I
- Compatible for use with numerous vehicular AC refrigerants and oils
- Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
Refrigerante de Aire Acondicionado Líneas
DISCHARGE LINE |
The Discharge Line carries High Pressure Gas between the Compressor and Condenser
|
SUCTION LINE |
The Suction Line carries Low Pressure Gas from the Evaporator to the Compressor (sometimes through an Accumulator).
|
LIQUID LINE |
The Liquid Line carries High Pressure Liquid from the Condenser to the Evaporator (often through an Expansion Device).
|
Some assemblies combine two or all three lines together.
Sistema de Aire Acondicionado Reparación Caja de heramienta
|
|