Made of a heat-sensitive material, Gates PowerGrip™ SB clamp solves coolant
leakage problems in both silicone and standard rubber wall hoses, even on out-of-round
fittings.
Gates thermoplastic clamp maintains a dynamic tension so that it never
needs retightening. Whenever the engine reaches operating temperture, the
shrink forces of PowerGrip SB readjust to a consistent clamping force. In
addition, its clamping force increases as the temperature drops below 40 degrees
F, thereby tightening the connection.
Cold leaks, which normally occur when the temperature drops below 40 degrees
F, are eliminated.
Installation using a heat gun is fast and easy, including hard-to-reach
places. Heat-gun attachments permit installation in confining areas that would
be extremely difficult to reach using a screwdriver on conventional orm-drive
screw clamps.
The PowerGrip SB hose clamp features a smooth surface that won't rust, corrode,
or result in cut fingers during installation.
PowerGrip SB hose clamps are completely resistant to all automotive fluids
including oil, antifreeze and even brake fluid.
Wider than conventional clamps, PowerGrip SB hose clamps can be positioned
over the raised bead on the end of the fitting nipple - even cast metal.
PowerGrip SB clamps are readily removed with Gates' specially-designed clamp
removal tool. The clamps also can be removed using a soldering iron to melt
through the thermoplastic material.
Sizes are available for 1/4 through 3-1/8 inch I.D. hose.
Erstausrüstung / alternative Artikelnummern: 42925
Lagerräumung Bestand Garantie Information:Lagerräumungsteile haben eine 30-Tage-Garantie (aber werden auch von unserem 30-Tage Rückgaberecht) abgedeckt).GATES Normaler Bestand Garantie Information:Eingeschränkte Garantie auf LebenszeitDetails zur Garantie