Drilled and Slotted Black Rotor and Drum Set with Super Duty Pads, Shoes, and Hardware
The most effective means to accomplish a proper brake job is to replace the rotors, friction and hardware. R1 Concepts has simplified your shopping experience by creating brake kits designed to fit your needs without having to search out all the necessary components.
Installation Tips
Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
Before installing the rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
Apply brake lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
Fits Rear; Sierra 1500 Base Model; Rear Drum Brakes; Caliper Bracket Casting 286C, 285C or Rear; Sierra 1500 Base Model; Rear Drum Brakes; Caliper Bracket Casting 352C, 351C
DYNAMIC FRICTION
Attention California Customers - This product contains Antimony Oxide and other chemicals which is known in the State of California to cause cancer ( or reproductive problems).
R1 CONCEPTS Warranty Information:12 months/12,000 miles