|
FRAM HM8A
|
|
$5.38
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$5.38
Total
|
|
|
|
|
|
| FRAM HM8A Specifications |
|---|
| Anti-Drain Back Valve | Yes | | Attachment Type | Spin-on | | Burst Pressure | 230.000 PS | | Bypass Relief Valve | Yes | | Bypass Relief Valve Setting | 12.000 PS | | Filter Media Material | Cellulose/Synthetic Blend | | Filter Type | Spin-On Canister | | Height | 5.105 IN | | Housing Color | Orange | | Inlet Type | Threaded | | Inside Thread Diameter | 3/4-16 | | Marine Approved | No | | Micron Rating | 8.000 Mi | | Non Slip Grip | Yes | | Outside Diameter | 3.797 in | | Thread Size | Standard | | Torque Nut | No |
|
|
FRAM® High Mileage® For vehicles with over 75,000 Miles
- Industry exclusive, patented time-released gel additive conditions oil through the entire change cycle
- Gel additives balance oil PH and maintain viscosity
- Ideal for older engines that are more susceptible to oil break-down
- Uses cellulose and synthetic glass blended media to provide 3X MORE engine protection than the average of leading economy oil filters
- 95% Dirt Trapping Efficiency
How It Works - Dirty oil enters the filter
- The oil passes through the media where it's filtered with 96% single pass efficiency
- The TRT™ additive gel is time released into the filtered oil
- The additive dissolves slowly into the oil
- The treated oil flows back into the engine to protect against corrosive wear, deposits and viscosity build-up
 Which Oil Filter Is Right For You?
| Driving Style |
| Filter Type |
Oil Change Intervals |
Normal City / Highway |
Heavy Traffic |
Dirty / Dusty Conditions |
Extreme Weather |
Towing |
Economy
|
3,000 - 5,000 Miles |
★ |
|
|
|
|
Standard Replacement
|
OEM Recommended |
★ |
★ |
★ |
|
|
High Performance / Heavy Duty
|
OEM Recommended |
★ |
★ |
★ |
★ |
★ |
 Oil Change Toolbox
Installation Instructions - Check owner's manual for correct oil specification, viscosity, and amount. Purchase oil by year, make, and model, or under the Tools & Universal Parts tab on RockAuto.com
- Wear proper protective gear (safety glasses, gloves, long sleeve shirt) to protect skin and eyes from hot oil.
- Place a Drain Pan under the crankcase and carefully open drain plug to drain oil. When oil is fully drained, reinstall drain plug on the oil pan.
- Position the drain pan under the oil filter. Unscrew oil filter (using a Filter Wrench, if necessary).
- Clean mounting base, making sure the O-ring from the old filter is not stuck to the filter mount.
- Apply film of clean oil to filter gasket.
- Screw new filter on until gasket reaches base contact, then tighten filter to manufacturer specifications.
- Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
- Shut off engine and recheck oil level after 5 minutes. Top off as necessary.
It is illegal to dispose of used oil or oil filters in a sanitary landfill or public waterway. Many towns have free hazardous waste drop-off sites, which a quick internet search will help you find.
|
| OEM / Interchange Numbers: HM8ADP |
FRAM Warranty Information:Filters - Vehicle Manufacturer's Recommended Service Intervals
Hard Parts - 12 MonthsWarranty Details |
|
