BBB Industries markets and sells their products under various brand names, including Genco, Vision-OE and Wilson. The product inside the box is the same, no matter what brand name appears on the box.
BBB INDUSTRIES 1030244P Specifications
Bushings Included
No
Distance Between Mounting Holes (IN)
21.5
Distance Between Mounting Holes (MM)
546.1
Hydraulic, Electric, or Manual Steering
Hydraulic
Inner Tie Rods Included
Yes
Input Shaft Diameter (IN)
0.813
Input Shaft Diameter (MM)
20.638
Input Shaft Length (IN)
2.125
Input Shaft Length (MM)
53.975
Mounting Hole Quantity
2
New Or Remanufactured
Remanufactured
Outer Tie Rods Included
No
Pressure Port Thread Size
11mm
Rack Length (IN)
48.875
Rack Length (MM)
1241.425
Return Port Thread Size
11mm
Total Turns Lock To Lock
2.938
Remanufactured; Includes Electronic Variable Orifice (EVO) Component
BBB's Remanufacturing Process:
Sealing surfaces are polished, restored and checked for smoothness
Seals and boots are replaced with new, OE-equivalent parts
Housings are bead-blasted to eliminate rust and/or corrosion
Components are inspected and tested for straightness and structural integrity
Assembled unit is 100% functionally tested for leaks and steering performance
Installation Tips
Replace Power Steering Pressure and Return Hoses when replacing the rack & pinion. Steering hoses can degrade internally and cause contamination in the power steering system, which can damage the new rack & pinion
Completely flush the system with an OE approved Power Steering Fluid prior to installation (the correct type of fluid is noted on the reservoir cap or in your owner's manual). Flushing the system is critical to prevent system contamination and failure
Consider installing a Power Steering Filter on the Power Steering Return Hose to prevent system contamination and extend the life of the power steering components
Bleed the system to prevent noise and extend the life of the steering components
Installation Tips
Videos
Additional Resources