| AMS AUTOMOTIVE 167019 Specifications |
|---|
| Counter Bore Depth (IN) | 0.157 | | Counter Bore Diameter (PP) (IN) | 5.762 | | Cover Pressure Plate Mounting Bolt Circle Diameter (IN) | 9.423 | | Cover Pressure Plate Mounting Hole To Flywheel Quantity | 6 | | Crank Bolt Circle Diameter (IN) | 2.839 | | Crank Center Hole Diameter (IN) | 0.482 | | Crank Mating Surface to PP Mounting Surface (IN) | 1.613 | | Dowel Pin Diameter Cover To Flywheel (IN) | 0.395 | | Flywheel Step (IN) | 0.363 | | Flywheel Type | Dual Mass | | Friction Surface Configuration | Raised | | Mounting Hole Diameter (IN) | 0.486 | | Mounting Hole Quantity | 8 | | Pressure Plate Bolt Hole Thread Size | M8 x 1.25 | | Ring Gear Outside Diameter (IN) | 11.361 | | Tooth Quantity | 114 |
|
|
| A Dual Mass Flywheel (DMF) serves two functions. The primary function is to store energy from each piston’s firing pulse, and then send it to the crankshaft so that it continues smoothly rotating through the next piston stroke. The secondary function is to dampen damaging torsional spikes caused by engine vibration. Historically, the clutch disc services this function, however, complex transmission designs required an entirely new concept, well beyond the capacity of standard clutch disc technology. AMS Dual Mass Flywheels are engineered and manufactured to OEM specifications, using premium grade iron, new ring gears, and new dowel pins (where applicable). In addition, each unit is dynamically balanced to reduce vibration and maximize performance.
|
Warranty Information:24 Months / 24,000 Miles |
|
