|
M-PACT 16080FST1X
|
|
$410.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$410.79
Total
|
|
|
(Only 1 Remaining)
|
|
|
|
|
|
| Performance Kit with Flywheel & Hi-Torque Steelback Disc; 8-3/8" x 15/16" x 21T |
The M-Pact ST1X Performance Clutch Kit is designed for street, track and off-road applications. Each kit features a high-clamp engineered pressure plate with a high-torque heavy duty steel backed friction disc and is assembled with precision engineered components designed for increased horse power applications. Excellent performance for the street enthusiast!
Features:
- Delivers up to a 100-150% increase in torque capacity and is designed for street, track, and off-road applications
- Advanced steel back friction linings provide additional clamping force and superior burst strength
- Reinforced steel backing allows for better heat dissipation delivering extended wear and quick recovery
- Assembled with a HD retainer stamping and increased hardness hub to ensure maximum strength and reliability
- Six inner and six outer heavy duty torsional dampening springs work with this assembly to minimize the shock of engagement
- Made with nodular iron casting for additional performance and strength
- Most M-Pact high-clamp pressure plates are assembled with an additional drive strap to increase strength and prevent breakage
M-Pact Clutch Kit Comparison
| Kit Level |
Designed For |
Friction Disc Type |
Torque Capacity Increase |
Clutch Pedal Feel |
OE Replacement
|
Daily Driving / Stock Vehicles |
Organic |
None |
OE Pedal Feel / Clamp Load |
Upgrade Kit
with Hi-Torque Steelback Disc
|
Stock Vehicles or Vehicles With Mild Power Increases |
Alloy Backed Organic |
Mild |
OE Pedal Feel / Clamp Load |
Upgrade Kit
with Hi-Torque Multi Friction Disc
|
Moderately Modified Vehicles or Aggressive Drivers With Stock Power |
Steel Backed Sintered Ceramic |
20-40% |
OE Pedal Feel / Clamp Load |
Upgrade Kit
with Hi-Torque 6 Puck Ceramic Disc
|
Moderately Modified Vehicles or Aggressive Drivers With Stock Power |
6 Puck Cera-Metallic |
25-50% |
OE Pedal Feel / Clamp Load |
Performance Kit
with Hi-Torque Steelback Disc
|
Street, Track & Off-Road Applications |
Dual Sprung Alloy Backed Organic |
100-150% |
Stiff Pedal Feel / High Clamp Load |
Performance Kit
with Hi-Torque Multi Friction Disc
|
Street, Track & Off-Road Applications |
Dual Sprung Steel Backed Sintered Ceramic |
100-175% |
Stiff Pedal Feel / High Clamp Load |
Performance Kit
with Hi-Torque 6 Puck Ceramic Disc
|
Performance Street, Track & Road Racing |
Dual Sprung 6 Puck Cera-Metallic |
150-200% |
Stiff Pedal Feel / High Clamp Load |
 Tips & Tools For The Job - Wear a Dust Mask to protect against hazardous clutch dust. You can also spray the clutch with water prior to removal to reduce the amount of airborne dust during disassembly.
- Use a Flywheel Turner to hold the flywheel in place while removing and reinstalling the pressure plate bolts.
- Apply Blue Threadlocker to flywheel bolts prior to installation to prevent backing out due to the high vibrations flywheels are subject to.
- Use the provided lubricant to lightly lubricate the splines of the input shaft. Over lubricating the input shaft risks lubricant transfer to the clutch friction disc and can cause clutch slippage.
- Be sure to install the new clutch friction disc in the correct direction. The disc will have a "Flywheel Side" label on one side.
|
Warranty Information:120 Days |
|
