GM GENUINE
More Information for GM GENUINE 15765633
Continue Shopping
 
GM GENUINE 15765633  
$360.79
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$360.79
Total
GM GENUINE 15765633close
<
>
Part image
GM GENUINE 15765633 Specifications
Alignment Tool IncludedNo
Cable IncludedNo
Clutch Diameter (IN)11.69
Clutch Disc Diameter (IN)11.69
Clutch Disc Diameter (MM)297
Clutch Disc Hub Diameter (in)1.13
Clutch Disc Spline Quantity10
Clutch MaterialMetal
Clutch Slave Cylinder IncludedNo
Counterweight AssistNo
Disc MaterialOrganic
Disc Type Sprung SolidSprung
Flywheel Bolts IncludedNo
Flywheel IncludedNo
Grease IncludedNo
Input Spline Quantity10
Mounting Hardware IncludedNo
New Or Remanufactured ClutchNew
Pilot Bushing IncludedNo
Pressure Plate Bolt Hole Diameter (in)0.42
Pressure Plate Bolt Hole Quantity6
Pressure Plate Bolts IncludedNo
Pressure Plate TypeDiaphragm
Release Bearing IncludedNo
Stay with the parts brand your General Motors vehicle came with and get the quality you know and trust with GM Genuine parts. GM Genuine parts give you the peace of mind that the fit, form, and function is up to the high standards and specifications of General Motors.

Tips & Tools For The Job
  • Wear a Dust Mask to protect against hazardous clutch dust. You can also spray the clutch with water prior to removal to reduce the amount of airborne dust during disassembly.
  • Use a Flywheel Turner to hold the flywheel in place while removing and reinstalling the pressure plate bolts.
  • Apply Blue Threadlocker to flywheel bolts prior to installation to prevent backing out due to the high vibrations flywheels are subject to.
  • Use the provided lubricant to lightly lubricate the splines of the input shaft. Over lubricating the input shaft risks lubricant transfer to the clutch friction disc and can cause clutch slippage.
  • Be sure to install the new clutch friction disc in the correct direction. The disc will have a "Flywheel Side" label on one side.



Warranty Information:
24 Month / Unlimited Mile Warranty