The AXADBXH-CH1 harness is designed for, and must be used with, the AXADBX-1 or AXADBX-2 interface (sold separately). Please refer to the AXADBX-1 or AXADBX-2 for the 16-pin connector with stripped leads.

• Provides accessory power (12-volt 10-amp)
• Maintains the retained accessory power (R.A.P.) feature
• Provides NAV outputs (parking brake, reverse, speed sense)
• Pre-wired AXSWC harness (AXSWC sold separately)
• Can be used in both amplified and non-amplified models
• Retains balance and fade (To retain fade in amplified models, use the AXADBX-1)
• Micro-B USB updatable

Additional Resources