Brake Pads are sold as a set. Quantity of one (1) is for both wheels
DYNAMIC FRICTION 1600110801 Specifications
FMSI Number
8213-D1108
Friction Material Attachment
Integrally Molded
Friction Material Composition
Ceramic
Inner Pad Height
2.205 in
Inner Pad Overall Thickness
0.63 IN
Inner Pad Width
4.146 in
Mounting Hardware Included
Yes
Outer Pad Height
2.205 in
Outer Pad Overall Thickness
0.63 IN
Outer Pad Width
4.146 in
Pad Wear Sensor Included
No
Pad Wear Sensor Type
Electronic
Prepared For Pad Wear Sensor
Yes
5000 Euro Ceramic; Includes Hardware Kit
Designed specifically for European applications, DFC 5000 EURO Ceramic Brake Pads are formulated to provide optimal and reliable stopping performance, excellent fade resistance, low dust, and stable friction performance across a wide temperature range.Features:
Stable friction performance across a wide temperature range
Rubber-Steel-Rubber shims reduce noise, vibration and harshness
Post-cured to eliminate friction material impurities
Scorched to minimize initial break-in time
Positive mold to ensure consistent material density
Chamfered to reduce noise when braking
Slotted to dissipate heat and prevent brake fade
Organic vs. Ceramic vs. Semi-Metallic - What Is The Difference?
A common question many drivers have when shopping for brake pads is “What is the difference between the different brake pad materials?” While all brake pads will stop your vehicle, there are pros and cons of each pad material:
Brake Pad Material
Cost
Dust Level
Noise Level
Stopping Power
Pad Life
Organic
$
Semi-Metallic
$$
Ceramic
$$$
Installation Tips
Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
Fits Rear; A4 Quattro; 321mm Front Rotors or Rear; Sedan; Wagon; A4 Base Model or Rear; Convertible; Sedan; A4 Base Model; 320mm Front Disc
DYNAMIC FRICTION
Attention California Customers - This product contains Antimony Oxide and other chemicals which is known in the State of California to cause cancer ( or reproductive problems).
DYNAMIC FRICTION Warranty Information:12 months/12,000 miles