BSE markets and sells their products under both BSE and Blue Streak Electronics. The product inside the box is the same, no matter what brand name appears on the box.
BSE 221044M Specifications
Connector Gender
Female
Connector Quantity
1
Connector Shape
Rectangular
Functions
Mass Air Flow
Terminal Gender
Male
Terminal Quantity
5
Terminal Type
Blade
Reman; Complete Assembly
By fixing and improving components regularly, Blue Streak Electronics knows which are the most vulnerable parts that need improvement. Their line of remanufactured Mass Air Flow Sensors provides OE-quality product to customers who demand it.
Features & Benefits:
100% Computerized Testing for all Modules and Sensors using advanced test equipment.
Latest OEM calibrations installed in all programmable modules.
Common component failures are 100% replaced.
Complete board reflow to ensure reliable performance.
Upgraded components used to improve circuit reliability and performance.
Trilingual installation instructions.
Replacing the Complete Housing Assembly instead of the Sensor Only ensures the connector air tubes are clean and protects the sensor element, which can be damaged by air pollution or oils on your hands.
Check for Vacuum Leaks First!
Vacuum leaks present symptoms similar to a faulty MAF Sensor. When replacing the MAF, always check for vacuum leaks, too. Common sources include:
Leaking Intake Manifold Gasket (found in the "Engine" category) - Vacuum Gauge readings below 17-22 in-Hg (normal manifold vacuum at sea level) at idle may indicate an intake manifold gasket leak.
Note: As elevation increases, readings decrease. Subtract 1 in-Hg from normal manifold vacuum reference for every 1,000 feet increase in elevation above 2,000 feet.
Stuck open PCV Valve - remove the PCV Valve and gently shake it; if it does not rattle, the valve is clogged or dirty and should be replaced.
Cracked Intake Boot (found in the "Engine" category)
Check for Vacuum Leaks First!
Videos
Additional Resources
RockAuto Newsletter: