Bremi Fahrzeug- Elektrik of Germany is an original equipment manufacturer and aftermarket supplier. Bremi’s strength lies in their ability to consistently provide industry leadership with innovative technology.
Features & Benefits:
All Mass Air Flow Sensors are manufactured under the same standards (ISO/TS16949) & continually optimized for fast response times resulting in a durable, high performance product that you can rely on.
Bremi Germany performs 100% testing of their Mass Air Flow sensors in accordance with the same testing criteria utilized by O.E.
Bremi Mass Air Flow Sensors
Replacing the Complete Housing Assembly instead of the Sensor Only ensures the connector air tubes are clean and protects the sensor element, which can be damaged by air pollution or oils on your hands.
Check for Vacuum Leaks First!
Vacuum leaks present symptoms similar to a faulty MAF Sensor. When replacing the MAF, always check for vacuum leaks, too. Common sources include:
Leaking Intake Manifold Gasket (found in the "Engine" category) - Vacuum Gauge readings below 17-22 in-Hg (normal manifold vacuum at sea level) at idle may indicate an intake manifold gasket leak.
Note: As elevation increases, readings decrease. Subtract 1 in-Hg from normal manifold vacuum reference for every 1,000 feet increase in elevation above 2,000 feet.
Stuck open PCV Valve - remove the PCV Valve and gently shake it; if it does not rattle, the valve is clogged or dirty and should be replaced.
Cracked Intake Boot (found in the "Engine" category)
Check for Vacuum Leaks First!
Videos
Additional Resources
RockAuto Newsletter: