Ultra-Power radiators and coolers are manufactured in ISO/TS 16949 certified factories and meet all original equipment specifications for quality and fitment.
Features & Benefits
Manufactured with a tube-fin brazed heat exchanger and high-flow tubing for faster cooling
Made from 100% new, high quality materials
CE certified to conform with health, safety, and environmental protection standards
Extensively tested to ensure the highest quality standards. Tests include:
High & low temperature impulse test
Thermal shock test
Bursting test
Inside and outside corrosion test
Vacuum test
Stone Chip Resistance Gravel meter
Metallic materials composition spectral analysis
Service Tip: If you are experiencing unexplained or reoccurring radiator core leaks, or notice dark spots on your failed radiator core, test your coolant for Electrolysis. If detected, correct the source of the problem before replacing your failed radiator to prevent repeat failure.
Measurement Guide
Cooling System Maintenance | Tips & Tools
Without regular maintenance, cooling system components will degrade and fail prematurely, which can lead to costly engine damage. Protect your engine with simple preventative maintenance:
Completely drain and flush the system using Cooling System Flush prior to installation. Flushing the system is critical to prevent system contamination and failure.
Consider replacing the Radiator Hoses (and Hose Clamps), Thermostat and Radiator Cap as part of routine preventative maintenance. System contamination can cause these parts to degrade and fail over time, which can lead to severe engine damage from overheating.
Refill radiator with fresh Coolant / Antifreeze according to the volume and formula specified in your Owner's Manual. Inspect levels and condition every year.