SACHS
Más Información para SACHS K7018702HD
{Suplente inventario Números: K70187-02HD}
Continuar Haciendo Compras
 
SACHS K7018702HD  
$262.89
Precio
$0.00
Depósito
+ Vendido en Paquetes de 1x1
Empacar
$262.89
Total
(Sólo Queda 1)
SACHS K7018702HDclose
Part image
Especificaciones de SACHS K7018702HD
Disco de Embrague Diámetro Externo11 7/8"
Disco de Embrague Diámetro interno1 1/8"
Dientes10
Heavy Duty Disc; Includes Disc w/ Strengthened Damper Hub
Los kits de embrague SACHS Heavy Duty son ideales para quienes remolcan un poco más de la capacidad nominal del vehículo. Estos kits incorporan un material de fricción de primera calidad con un revestimiento posterior de acero que ayuda a aumentar la durabilidad y la disipación del calor, lo que se traduce en una mayor vida útil. Estos juegos también mantienen un tacto suave del pedal durante el acoplamiento y el desacoplamiento.

  • SACHS es reconocida como marca premium por Professional Service Facilities incluidos los especialistas en importación
  • Los embragues SACHS se fabrican para cumplir o superar las especificaciones de los fabricantes de equipos originales.
  • Componentes de SACHS están adaptados a los equipos originales con una calidad constante de juego a juego
  • Los juegos contienen el conjunto de la tapa, el conjunto del disco, el liberador y el lubricante especial.
Características de Juego de Embrague SACHS

Orgánico versus Kevlar versus cerámico Fricción Disco - ¿Cuál es la diferencia?

The Friction Disc is a vital part of any clutch. It connects the pressure plate and flywheel, and is responsible for transferring engine power to the rest of the vehicle. Clutch Kits come with several different types of friction discs, and it is important to understand the pros and cons of each material:

Clutch Disc Material Smooth Engagement Holding Power
(Friction "Grab")
High Torque Capacity Lifespan Gentle To Flywheel
Organic
★★★ ★★ ★★★
Kevlar
★★★ ★★ ★★ ★★★ ★★★
Ceramic / Cerametallic
★★★ ★★★


Consejos y Herramientas Para La Reparación
  • Wear a Dust Mask to protect against hazardous clutch dust. You can also spray the clutch with water prior to removal to reduce the amount of airborne dust during disassembly.
  • Use a Flywheel Turner to hold the flywheel in place while removing and reinstalling the pressure plate bolts.
  • Apply Blue Threadlocker to flywheel bolts prior to installation to prevent backing out due to the high vibrations flywheels are subject to.
  • Use the provided lubricant to lightly lubricate the splines of the input shaft. Over lubricating the input shaft risks lubricant transfer to the clutch friction disc and can cause clutch slippage.
  • Be sure to install the new clutch friction disc in the correct direction. The disc will have a "Flywheel Side" label on one side.


Adicional Recursos

Boletín de Servicio Técnico del Procedimiento de Purga del Sistema Hidraúlico

Atención Clientes de California - N


Información de Garantía:
12 meses / 12,000 Millas