Includes Semi-Coated Rotors, Ceramic Pads & Hardware
Features:
Ceramic pads keeps wheels dust-free & Semi-Coated rotors maintain that new car look
Rotors are coated for corrosion resistance on the hat, outer edges and vanes
Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
Multi-layer rubberized shims provide virtually noise-free braking
Rotors are 100% dynamic mill balanced and manufactured to strict tolerances for DTV and runout for smooth, quiet performance
Installation Tips
Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
Before installing the rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
Apply brake lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
POWER STOPZ17 Evolution Clean Ride Ceramic with HardwareInfo
Rear; GT Model
POWER STOP
Attention California Customers - WARNING: This product can expose you to chemicals including Arsenic, Cadmium, Chromium (Hexavalent compounds), Lead, Nickel, Cobalt and Antimony Trioxide which are known to the State of California to cause cancer, and Arsenic, Cadmium and Chromium (Hexavalent compounds) which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.